Get 20% off! arrow_drop_up

Item has been added

Skip to content

Rode NT6 Compact Condenser Microphone

$640.00 $920.00
local_offer Save 30%
Unit price  per 
local_offer There are 15 items sold in last 20 hours

Guaranteed safe & secure checkout

    Payment methods
  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa
visibility There are 5 visitors are browsing our store
Rode NT6 Compact Condenser Microphone
local_offer

Rode NT6 Compact Condenser Microphone

The NT6 is a small-diaphragm cardioid condenser microphone with a remote capsule, specifically designed for difficult mounting applications where the highest quality audio is required.

The microphone is split into two modular components that are connected via a custom 3-meter shielded, Kevlar-reinforced cable. The head features a 1/2-inch gold-sputtered condenser capsule with a multi-position mounting ring that provides 180 degrees of vertical rotation. The body houses the microphone preamp, which features a high-pass filter (80Hz) and a -10dB pad.

Key Features:
  • Premium small-diaphragm condenser microphone with remote capsule
  • 1/2-inch gold-sputtered
  • Two-stage pad, two-stage high-pass filter
  • Ideal for difficult mounting applications

Miniature Detached Capsule and Body

A 10' Kevlar-reinforced microphone cable joins the miniature capsule and output stage. This design provides endless mounting possibilities on instruments, the ability to capture room ambiance, and more.

Swivel Mount

The 2-position swivel mount allows both horizontal and vertical pivoting of the capsule for accurate positioning. Also included are 2 thread adapters (1/4" to 5/8" and 1/4" to 3/8") which enable attachment to virtually any microphone stand.

Cardioid Polar Pattern

The cardioid polar pattern effectively suppresses off-axis audio, reducing residual noise caused by ambiance and feedback.

Low-Frequency Roll-Off

A low-frequency roll-off switch eliminates noise and rumble below 80 Hz. -10 dB Pad Switch A -10 dB pad switch provides added headroom for capturing signals that exhibit excessive levels and transients. The pad allows these signals to be captured without noise caused by distortion and overload.

Specifications
Analog Performance
Operating Principle Pressure Gradient
Transducer Condenser
Diaphragm 0.5" / 12.70 mm
Polar Pattern Cardioid
Frequency Range 40 Hz to 20 kHz
Signal-to-Noise Ratio 75 dB 
Equivalent Noise Level 19 dB A-Weighted
Maximum SPL 135 dB SPL
Pad -10 dB
THE 1%
Impedance 200 Ohms
Sensitivity -37 dB
Dynamic Range 119 dB
General
Output Connectors 1 x 3-Pin XLR
Operating Voltage 24 V
48 V
Length 7.44" / 189 mm
Diameter 2.52" / 64 mm
Weight 0.85 lb / 386 g

Free Shipping

Best Offers

Secure Payments