Rode Vlogger Kit Universal with 3.5mm Ports
The Universal Vlogger Kit contains everything you need to get professional results when filming using your mobile phone with a 3.5mm headphone socket. The VideoMicro connects directly to your device, delivering crisp, clear, directional sound for any application. The SmartGrip secures your device firmly in place for stable recording and connects seamlessly to the Tripod 2 for either handheld or tabletop use, while the MicroLED ensures all your shots are perfectly lit.
The Universal Vlogger Kit comes with the DCS-1 dual cold shoe mount for quick and easy mounting of both the VideoMicro and MicroLED, a Rycote Lyre shock mount and WS9 furry windshield for filming outdoors and in adverse weather conditions.
- Complete mobile filmmaking kit
- Directional sound pickup to reduce background noise
- MicroLED light offers over four hours operation on a single charge
- Three-position tripod for handheld or static use
- Gimbal tripod head for accurate camera positioning
- All-metal mount with rubberised grips for phones 65mm to 85mm wide
- Dual cold shoe mount included
Microphone Features
Durable and Small
At just 3" long and 1.5 ounces light, the VideoMicro is an unobtrusive companion for your smartphone. Its ceramic coating mitigates glare and its durable aluminum body aids in RF rejection.
Shotgun Mic with Directional Sound Pickup
Whereas most built-in smartphone microphones pick up sound from all directions, this microphone utilizes a cardioid polar pattern to focus on sound in front of it while attenuating sound entering from the rear. Its active electronics and directional condenser element deliver more detailed audio than the mics typically found in mobile devices.
Easy Hookup to Smartphone
The SC7 detachable coiled 3.5mm TRS to TRRS cable is supplied for fast hookup to any smartphone with a 3.5mm headphone port. The cable is wired to ensure that the mic signal is correctly routed to the input of your phone.
Runs on Plug-In Power
Since the VideoMicro runs on plug-in power, no batteries are required to operate it. Just connect the microphone to your smartphone and forget about swapping or charging batteries.
Detachable Shockmount Inhibits Vibrations
Understanding that the rubber bands used in many shockmounts can snap and stretch, Rode chose to utilize a rugged Rycote Lyre suspension-style shockmount. This simplifies setup of the mic and inhibits the transfer of vibrations from your mobile phone. Plus, the bottom of the shockmount features a camera shoe mount, ensuring easy attachment to the supplied DCS-1 dual cold shoe mount.
Furry Windshield Minimizes Wind Noise
The VideoMicro includes a furry windshield to minimize unwanted wind noise from breezes, fans, heaters, and air conditioners. SmartGrip Features Smartphone Mounting The SmartGrip is a high-quality solution for mounting a smartphone on a tripod. It features rugged metal construction with rubberized grips and is suitable for mounting phones from 2.6 to 3.4" in width.
Extra Mounting Points
The SmartGrip features a cold shoe mount for easy attachment of Rode VideoMics and other accessories. Three 1/4" thread attachment points allow for easy mounting on tripods and grips in a range of orientations.
Specifications
Acoustic Principle | Pressure gradient |
---|---|
Polar Pattern | Cardioid |
Frequency Range | 100Hz - 20kHz |
Signal to Noise Ratio | 75 dB SPL |
Equivalent Noise | 20 dB SPL |
Maximum SPL | 140 dB SPL (1 kHz @ 1m) |
Sensitivity | -33dB re 1V/Pa (22mV @ 94dB SPL) ± 2dB @ 1kHz |
Dynamic Range | 120dB SPL |
Power Requirement | Plug-in power required (2V-5V DC) |
Microphone Output | 3.5mm TRS- mini-jack (dual mono) |
SC7 Cable Output | 3.5mm TRRS mini-jack (suitable for mobile devices) |
Material | Aluminium |
Colour | Black |
Weight (grams) | 42 |
Dimensions | Length: 80mm Height: 68mm Depth: 21mm |